Filter By:
Parts & Accessories
$9.99
$43.99
77% Off
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market.
- Includes T-slot hardware, covers, and install tool.
- Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts.
- Compatible with Yakima JetStream bars and most other T-slot style crossbars.
Product Specs:
- Weight: 0.25 lbs.
- Dimensions: L 2.75 in x W 1.50 in x H 0.50 in
- Limited Lifetime Warranty
$10.99
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core.
Product Specs:
- Weight: 0.02 lbs.
- Limited Lifetime Warranty
$11.99
Safety and wheel straps for Joe Pro series strap racks. Includes one each.
$14.99
Hardware for ShowBoat 66.
Includes:
- 2 end caps
- 1 stop collar
- 1 set screw
- 1 hex wrench
$20.99
Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp.
- Includes 2 FatStraps to carry one fat bike
- Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"
$22.99
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
$25.00
Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.
$26.99
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.
$28.99
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks.
- Includes two straps
- Weight: 0.44 lbs.
- Dimensions: L 15.50 in x W 1.00 in x H 18 in
$29.00
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
$29.99
- Installs easily in a truck bed or anywhere else you need a simple fork mount carrier
$38.99
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately.
- Lock rack accessories to your vehicle's crossbar
- Use with bike, boat, and BasketCase accessories
- SKS Lock Cores sold separately
Product Specs:
- Weight: 0.20 lbs.
- Dimensions: L 4.00 in x W 3.25 in x H 1.00 in
- Limited Lifetime Warranty
$39.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks.
- Not for use on our original NV rack.
$39.00
Hitch Lock V4
- Includes hitch pin, lock, and 2 keys
- For locking hitch rack to car
$42.99
Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements
Product Details:
- Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately).
- Structural steel brackets with powder-coat finish for durability and resistance to the elements.
- The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed).
- Only compatible with Yakima SkyLine and TimberLine towers.
- Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle.
Product Specs:
- Weight: 0.50 lbs
- Some assembly required, 60 minute install
$44.99
The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered.
Product Details:
- Hanging storage hooks for the SkyRise tent keep your camping gear organized
- Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities
- Yakima carbine attachment hook is secure, strong, and easy to use
- Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear
- Sold as a pack of four
Product Specs:
- Weight: 0.48 lbs
- Dimensions: L 6.00" x W 1.60" x H 0.50"
$44.99
Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2.
- Includes 2 FatStraps to carry two fat bikes?
- Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"
$45.49
For those riding with old-school RoundBars, this simple kit holds our Fishing Kayak Saddles tight so they don't rotate out of position.
- Prevents our BigCatch saddles from rotating on our RoundBars
- For use with Yakima RoundBar ONLY
- Weight: 0.75 lbs
$48.99
Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle.
- Easy cam lever for quick installation
- Durable stainless steel skewer
- Up to 110mm front hubs
Product Specs:
- Weight: 0.44 lbs.
- Dimensions: L 9.00 in x W 0.75 in x H 2.00 in
- Limited Lifetime Warranty
$49.99
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad.
PRODUCT DETAILS
- Foam padding protects boats and other cargo from damage
- Durable, ballistic nylon construction
- Look and loop closures and 28” length perfectly fit around the LongArm crossbar
- Center cutout allows side or centered placement on crossbar
- Sold as a single pad
TECHNICAL SPECS
- Weight: 0.50 lbs
- Dimensions: L 28.00in x W 3.00in x H 3.00in
$49.99
Yakima's Rattler Wheel Straps are replacement wheel straps. They install to your tray easily and have a ratcheting closure for security.
$49.99
Why let loading and unloading take a toll on your gear and rack systems? Our new, extra-thick Wear Strip is a raised rubber strip designed to protect equipment and T-slot crossbars. Sold in trim-to-fit pairs, the Wear Strips install easily and help keep out debris.
Product Details:
- Durable rubber strip protects gear and crossbars from the wear-and-tear of loading
- 76" length can be easily trimmed to fit any bar width
- Compatible with Yakima HD Bar and JetStream Crossbars
- Set of two
Product Specs:
- Weight: 0.50 lbs
- Dimensions: L 76.00in x W 1.12in x H 0.33in
- Fully assembled
$54.99
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place.
Product Details
- Creates a secure attachment point for bow and stern tie downs
- Fits easily under a hood, hatch or trunk
- Installation is simple - just drop them in place
- Durable coated strap protects your vehicle's paint
- Sold as a pair Technical Specs
- Weight: 0.43 lbs
- Dimensions: L 6.50in x W 2.00in x H 10.12in
$55.99
The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up.
- Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four.
- Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only.
- Weight: 0.42 lbs
- Dimensions: L 1.75in x W 1.50in x H 1.00in
- No Assembly Required
Page 1 of 4
Next page