Grips

Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes without shifters - Set of two grips Specifications - Length: 107mm - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 33 - Weight (g): ±115g / Pair

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

Jones H-Grips made of EVA foam. 34mm diameter. Very light at just 67 grams for the long set of grips with plugs! These grips can be used, and will work fine with the bar plugs that come with Jones H-Bars, but these grips include larger, more protective bar plugs, so that your grips won't get torn up as easily. The ends of the grips are beveled to meet the angle of the bar plug, so that the plug can protect the end of the grip better, which is really important when you're laying the bike down on its side. The bar plugs themselves have a captured nut in the wedge so that when you loosen the bolt to remove the grips, the nut stays in place and the plug comes right out! And now both the nut and the bolt that threads into it are stainless steel to resist rust! Jones H-Grip expanding plugs included! Grips are sold as pairs.

The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum

- Use: Touring, E-Touring, MTB-Touring, E-MTB, Fitness, City - The evolution of the original award-winning comfort grip - Alleviates hand and wrist pain - Exceeds strict EU quality standards with a SGS certification - Made in Germany - Weight: 165 g

The GP1 Evo is the new benchmark for hand comfort and support, is free of harmful substances and exceeds strict EU quality standards with a SGS certification. The Evo version elevates the original multi-award-winning comfort grip to the highest level of ergonomics and comfortable cycling. Design, development and manufacturing are Made in Germany to guarantee the highest quality product with increased sustainability and minimal waste production. - German made rubber compound is of the purest quality - Forged aluminum clamp, while the inner core of the GP1 Evo is made plastic that we have reinforced with fiberglass - Carbon bar compatible - Alleviates hand and wrist pain with ergonomic design - Large grip is best for riders with large hands, non-dynamic riding, commuting, and city riding - Shape: Ergonomic - Lock On: Yes - Length: 131.9

The GP1 Evo is the new benchmark for hand comfort and support, is free of harmful substances and exceeds strict EU quality standards with a SGS certification. The Evo version elevates the original multi-award-winning comfort grip to the highest level of ergonomics and comfortable cycling. Design, development and manufacturing are Made in Germany to guarantee the highest quality product with increased sustainability and minimal waste production. - German made rubber compound is of the purest quality - Forged aluminum clamp, while the inner core of the GP1 Evo is made plastic that we have reinforced with fiberglass - Carbon bar compatible - Alleviates hand and wrist pain with ergonomic design - Small grip is best for riders with small hands, a dynamic riding style, those wearing thick padded gloves, and riders riding or racing mountain bike terrain - Shape: Ergonomic - Lock On: Yes - Length: 131.9

The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

With sweeping transitions from the padded thumb area to the deep-dish diamond top pattern to a recessed half-waffle, the LOCKJAW delivers a technically precise feel from end to end. Utilizing our TRC+ rubber compound allows us to maintain industry-leading durability delivered in a soft, plush, and sticky durometer. By combining our tapered inner sleeve and single lock ring system, coupled with our new extra-grippy rubber and recessed half waffle, the LOCKJAW gives you an extremely responsive-feeling cockpit. If you are looking for the ultimate control at your fingertips, the LOCKJAW continues to elevate the renowned DEITY Grip line to new levels. - Padded thumb area for comfort and smooth transitions - Recessed half-waffle design for added control without hot spots - Deep dish DEITY diamond pattern compresses for comfort but also provides unrivaled traction - Featuring soft DEITY TRC+ rubber compound for durability and increased grip - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice! - 104 grams for the set

- 31mm grip with micro diamond pattern - Kevlar infused TRC + rubber compound

- The thinnest DEITY grip to date - Featuring soft DEITY TRC+ rubber compound for durability and increased grip - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward facing bolts that feature loc-tite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort and full range of control - Diamond pattern wraps around the end of the grip - 133.75mm length with a 30.5mm outer diameter - Not compatible with bar ends or plugs - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 96 grams for the set INSTALLATION TIP: To fully and properly install your SLIMFIT grip due to the tapered inner sleeve...make certain to whack the end of the grip 3 times with the palm of your hand until the grip fully seats onto the handlebar. If you find the fit is a bit tight due to your particular handlebar, a small amount of Isopropyl Alcohol can work wonders for lubrication. Finish the install by tightening the hardware to the specs listed on the packaging.

The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.

Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.

Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition. The 90mm width of these grips accommodate twist shifters.

A durable lock-on grip with a unique finned texture for added comfort and control on the trail. Get a grip on sustainability The XR Trail Elite mountain bike grip has a finned texture that forms to your hand to keep you comfortable on all-day riding sessions. A higher density material surrounds the end of the grip for added durability and the lightweight CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design are optimized for control and comfort - Grip core made with recycled ocean-bound plastic - Single-clamp design maximizes grip surface for secure, predictable performance - Alloy core-lock clamp eliminates slipping by securing grip core to bar - Higher-density end cap resists scraping for added durability - 3mm M4 bolt increases hold and resists stripping - 31mm diameter

Dual pattern, dual density, under 100 grams grips Benefits: - Dual pattern, dual density. - Big inward diamonds at the thumb, smaller and outward diamonds with waffle style at the center provide high grip without compromising comfort. - Locking is provided with a single inside collar. - The pair are just under 100 grams. - Subtle flange at the end. Specifications: - 132mm total length. - 30mm constant diameter. - Constant thickness. - 94 grams (3.46 ounces).

Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs

- 36-37mm installed diameter: one of the largest grips on the market - 100% silicon construction is soft, comfortable and dampens vibrations - Tacky texture, works great with or without gloves - Reduces hand fatigue - Includes Wolf Tooth logo bar plugs

Ergonomic silicone grips from Wolf Tooth. - Multi-position ergonomic design - Unique design increases grip and comfort while climbing

Slightly thicker than the Razer Grips, slightly thinner than the Fat Paw Grips, these 6.5mm thick grips are great for longer rides, as they reduce hand fatigue and finger numbness. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - 6.5mm thick

Ergonomic grips with this unique cam profile lets you choose the position that best supports your hand position and style of riding. The 11.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 40mm installed diameter - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Ergonomic shape makes for a reduced circumference compared to non-faceted grips, providing padding and comfort only where you need it - Facets create four edges on grips, which makes for additional points of contact for your hands and added grip Includes bar end plugs

Designed for the XC racers. 5mm of 100% silicone compound provides excellent vibration dampening and superior comfort. - 100% Silicone weather resistant material - Plastic bar end plugs - 5mm thick

The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Featuring a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colors, marble and gum options, these grips give you the option to match grip performance with your personal style. - Single-ring clamp for max width and comfort - Available in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black Marble - Soft and durable ridged rubber grip pattern - Length: 133mm - Clamp: Single

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 30 - Weight (g): ±115g / Pair

Spoon Grips have an incredibly slim, low profile design and grip pattern, yet remain reasonably comfortable due to a special tacky rubber compound. Double locking alloy rings keep them secure in any conditions, and soft plastic end plugs protect you from barends. Need the confidence of locking grips without the high price, try a set of Spoons! - Micro diamond pattern tacky rubber grip - Two anodized alloy lock ring clamps - Length: 130mm - Diameter: 30mm - Weight: 110g/pair - Plastic end cap included

Connectors feature Serfas' great dual-density design for excellent comfort. The hard inners offer a firm base and the soft outers provide a tacky and comfortable feel. And Connectors are easy to install and super secure, too.

SRAM's Comfort Grips are made of compliant rubber in an ergonomic shape for excellent support and comfort. They have stylish SRAM logos and are built to stick tight on the handlebars and last.

When you're going fast, you need to hold on to something. SRAM's DH Silicone Locking Grips have you covered with clamps on both ends for a secure bar hold. Their rubber surface with thumb donut and "S" logo design offer a great feel.